服务热线:
欢迎光临有限公司网站!
产品百科
您当前的位置:主页 > 产品百科 >

山东宾州阻燃安全网生产厂家

发布日期:2018-11-27|变形缝生产厂家小编
分享到:

  山东宾州阻燃安全网生产厂家防火安全网应按规定建设,特别是在高海拔作业时。主要原则是什么?

  1。在每个连接点,侧索应靠近支撑件。连接点应符合容易搭接、连接牢固、搭接简单、加载后不自由自在的标准。

  2。当连接几个阻燃安全网时,山东宾州阻燃安全网生产厂家一些相邻的安全网应该关闭或堆叠。与安全网的原材料一样,连接绳的强度也不应低于网的强度。安装平网时,应严格遵守安全操作规程。连接绳应符合负载高度、网宽和缓冲距离。

  三。设备平面应与水平面成直线,网底应与脚手架安全紧密密封。为保证安全网受力均匀,必须定期将垃圾排入网内,网内不得有积聚。使用前必须对安全网装置进行检查,必须按照规定确定安全网。检查时间。

  阻燃安全网在储存、运输和加工过程中需要通风、遮阳、隔热,以防止化学品一起侵入。山东宾州阻燃安全网生产厂家当运输袋装安全网时,不要使用挂钩。

  Fire-retardant safety net should be built according to the rules, especially when working at high altitude. What are the main principles?

  1. At each tie point, the side rope should be close to the support. The tie point should conform to the criteria of easy tie-up, strong connection, simple tie-up, and not free and easy after loading.

  2. When connecting several flame-retardant safety nets, some of the adjacent ones should be close or stacked. Like the raw materials of the safety nets, the strength of the connecting ropes should not be lower than the strength of the nets. When installing the flat nets, the safety operation rules should be strictly followed. The connecting ropes should conform to the load height, the width of the nets and the buffer distance.

  3. The device plane should be straight with the horizontal plane, the bottom of the net should be tightly sealed with the scaffolding safety. To ensure that the force of the safety net is uniform, it is necessary to regularly arrange the garbage in the net, and there should be no accumulation in the net. It is necessary to inspect the safety net device before it can be used, and the safety net must be determined according to the requirements of the rules. Time to check.

  Flame-retardant safety nets need ventilation, shading, heat insulation during storage, transportation and process to prevent the invasion of chemicals together. Hooks should not be used when transferring bagged safety nets.

[返回列表]
地址:    吴经理:  
Copyright © 2002-2017 DEDECMS. 织梦科技 版权所有 Power by DedeCms
技术支持:九鲁网络